FA-FDR1MD24B-SD,48 Fibers Slide Out Fiber Patch Panel With Rails And Front Board To Bear Pigtail
There are a wide variety of fiber optic patch panels, but in
general, the main structure forms are as follows:
Rack type: a rack type fiber optic patch panel is to install
multiple units on a rack, and each unit is an independent fiber
distribution frame. This fiber patch panel not only retains the
characteristics of the original small and medium-sized optical
fiber distribution frame, but also provides the space utilization
rate through structural deformation, which is a common structure in
the early stage of the large capacity fiber optic patch panel.
However, because of its inherent limitations in space, it is with
some inconvenience in operation and use.
Drawing type: drawer type fiber optic path panel also divides a
rack into multiple units, each of which consists of one to two
drawers. When the fusion splicing and line tuning are carried out,
the corresponding drawers are pulled out to operate outside the
frame, it is with a larger operation space, so that each unit does
not affect each other. The drawers have a locking device in both
pulling out and pushing, which can guarantee the device is safe and
reliable. Although the fiber optic patch panel cleverly provides
large space for optical cable terminal operation, it is still not
able to provide maximum convenience for optical connection line
storage and placement as unit type. This fiber patch panel is one
of the most popular forms at present.
Module type: modular structure is to divide fiber optic patch panel
into many functional modules. Optical cable fusion, distribution
line, connection line storage and other function operations are
completed in each module. These modules can be assembled into a
public rack according to needs. This structure provides the maximum
flexibility to meet the needs of the communication network. The
module type fiber optic patch panel with large capacity using panel
and drawer and other unique structure, so that the optical fiber
splice and wiring is more convenient; in addition, the vertical
wire groove and a middle frame, effectively solves the storage
problem for fiber optic pigtail. Therefore, it is the most popular
type of large capacity fiber optic patch panel, but its current
cost is relatively high.
The selection of optical fiber patch panel is an important and
complex work. It should take full account of various factors
according to local specific conditions. Based on careful
understanding and repeated comparison, we can choose a best fiber
optic patch panel to meet current needs and future development.
Product Features Of Rack Fiber Optic Patch Panel
The combustion performance of plastic parts meets the requirements
of GB51697-85;
There is protective sleeve for optical fiber when it through metal
hole, the bending radius of the fiber core and pigtail is greater
than 37.5mm;
Bending radius of the optical cable enters the chassis is 15 times
larger than the diameter of the optical fiber cable;
The metal shell is made of thickness 1.5mm cold rolled plate with
epoxy plastic spray, beautiful appearance, easy to use;
With optical fiber cable fixation and protection device;
With optical cable terminal function;
With line adjusting function;
With protection function for optical fiber and fiber optic pigtail;
Suitable for medium and small wiring system like optical fiber to
residential quarters, fiber to building, remote module Bureau and
wireless base station and so on.
Main Parameters
| Part number | FA-FDR1MD24B-SD |
| Fiber capacity | Maximum 48 fibers |
| Adapter type | SC Duplex |
| Width | 19” |
| Height | 1U |
| Working temperature | -10°C~+40°C |
| Storage temperature | -25°C~+55°C |
| Relative humidity: | ≤85%(+30°C ) |
| Atmospheric pressure | 70Kpa~106Kpa |
| Dielectric strength | 3KV * (DC) /1min no breakdown, no flashover; |
| Insulation resistance | 1000M * /500V (DC) |
| Use life | =>1000 times |
| Fiber bending radius | => 40mm |
