FTTA Far Transmission Fiber Patch Cord LC - LC SM Or MM Duplex For Base Station

Pulling far technology generally includes three kinds of techniques, such as radio frequency, middle frequency and base band pulling far and so on. Radio frequency pulling far is a technology that transfers the baseband signal to the optical signal and amplifies it at the far end.

TD-SCDMA fiber optic pulling far technology is mainly used in radio frequency pulling far and baseband pulling far. The radio frequency is far away from the radio frequency signal through optical fiber coupling components. The remote part includes photoelectric coupling, power amplifier and smart antenna.

The baseband pull is similar to the baseband pull way of WCDMA. It is divided into baseband part (BBU) and radio frequency part (RRU). In the middle, optical fiber optic jumper is used for signal transmission. This mode is sometimes called distributed base station or radio frequency remote (BBU+RRU).

FTTA non armoured base station pulling far fiber optic jumper (far transmission fiber patch cord), uses φ7.0mm LSZH black pulling far fiber cable. Both ends of the branch is with armor tubes and added with optical fiber connector like LC/SC/FC/ST and so on, and in some of the application environment, add bellows or nylon net on both sides of branch( the part with connector) in order to achieve strengthen protection.

The pulling far ( far transmission ) fiber optic patch cord is suitable for FTTA outdoor base station pulling far traction, RRU to BBU port interconnect, 3G, 4G, LTE and distributed base station, power communication system and so on.

Main Parameters Of Far Transmission Patch Cord

Note: This patch cord can be with waterproof plug.

Main Characteristics

The ODC fiber optic jumper maintains the performance of the traditional fiber optic patch cord.

1, 2 channel multimode or single mode fiber (50/125μm or 62.5/125μm), and also can be 4 channels optical fiber;

2, LC 1.25mm or SC/ST/FC 2.5mm ceramic ferrule;

3, Single-mode fiber insertion loss < 0.5dB, the return loss is more than 50dB;

4, Working temperature: - 40 ~ + 85℃;

5, Working life: at least 200 times.

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.