FAPC-SPSPM2, High Precision Multimode SC Duplex Fiber Optic Jumper For Optical Communication

With the transmission rate of data center gradually from 1 Gbps increased to 10 Gbps, 40 Gbps and even 100 Gbps, the loss of optical fiber data center has gradually attracted people's attention, especially the insertion loss of optical fiber patch cord, the transmission rate is higher, requirement for insertion loss of fiber optic jumper is more strict, which limits the cross connection of the data center in a certain extent. Practice shows that fiber jumper with insertion loss of only 0.2dB can greatly improve the flexibility of the fiber system cabling.

The insertion loss and return loss are important indexes for evaluating the quality of optical fiber patch cord. Insertion loss refers to decibels of output optical power relative to input optical power when the optical signal through the optical fiber jumper, usually caused by core displacement, inclination angle, end clearance of optical fiber etc.. Generally speaking, the insertion loss is the smaller the better, the maximum insertion loss of a qualified fiber optic jumper should be less than 0.75 dB, and the insertion loss of most fiber patch cord is 0.35 dB.

Optical fiber jumper is a device used to patch optical signal and connect fiber links, smaller insertion loss although can bring smaller attenuation, but the blind pursuit of high optical parameters will cause big cost increasing on materials and process technology. In the design of optical system, the design of power source will be reserved, greater than the power of practical application, the optical attenuator, optical splitter devices, and will power down to the needs of the actual use of power value. So it is enough if the insertion loss of the optical fiber jumper can reach the requirement of the Telecom level. If you want to use fiber optic jumpers with better performance, such as better interchangeability, reliability and consistency, Fiberall recommends users to consider fiber patch cord passed interference (3D) test, it is high standard fiber optic jumper meets current global requirements.

Main Parameters Of Multimode Fiber Optic Patch Cable

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.