FA-FXPCSPSPS1, FTTH Fiber To The Home Drop Patch Cord With Pre-terminated Optical Connector
FTTH drop cable jumper is with pre-terminated connector at both
ends before leaving factory, so that the operator is very
convenient to operate ftth drop cable jumper; and change low
successful rate of the traditional ftth drop cable jumper, improve
the construction progress and solve the operational problems of
assembling connector; the simple structure of the fast connector is
convenient to use. And the FTTH drop fiber jumper is suitable for
cabling which is with fixed position, and limit space, and it can
be used to open or short distance pipeline laying.
According to strengthen member type, the FTTH drop patch cord can
be divided into two types, one is with metal strengthen member and
the other is with non metallic strengthen member. The metal
strengthen member is able to achieve greater tensile strength and
it is suitable for indoor vertical cabling in short distance and
horizontal cabling with long distance. Indoor FTTH drop cable
sheath usually adopts PVC or LSZH material, flame retardant grade
of LSZH is higher than PVC, meanwhile, the black LSZH material is
with UV blocking erosion, it is able to prevent cracking and
suitable for fiber cable access from outdoor to indoor.
G.657 bending sensitive fiber is with two attractive
characteristics: excellent bending ability and low water peak, and
it is able to make full use of 1260nm~1625nm (E-S-C-L band) . The
bending resistance of G.657 fiber suppresses the additional loss at
1800nm. It is not only suitable for L band, but also easy to
install, especially in the fiber to the home network, the bending
radius of the fiber is able to meet installation requirement of
minimum corner of the wall. Not only that, the mode field diameter
of G.657 fiber is in line with the standard G.652 single-mode
fiber, which makes it have low connection loss with G.652 fiber,
including splicing loss and insertion loss. The optical fiber can
fully meet the capacity requirements of network.
Main Features Of FTTH Drop Fiber Jumper
FTTH drop cable is with light weight, low cost and low construction
cost;
Drop fiber jumper adopts cold connection technology, it is fast and
flexible, with high crushing resistance and tension resistance;
Using glass reinforced fiber (G-FRP) or aramid reinforced fiber
(K-FRP) as strengthen member, the cable is soft and with excellent
bending performance, ensure the bending radius meets requirements;
With low smoke halogen free material to meet the requirements of
indoor flame retardant;
The drop cable adopts ITU-T G657A bending sensitive fiber, and the
minimum bending radius reach 15mm;
Self-supporting type drop fiber cable adopts high carbon steel wire
as strengthen member, which has superior tensile property.
Application: Data transmission, telecom, access network, test
equipment, broadband access network, fiber CATV.
Fiber Performance
| Fiber type | Unit | SM | MM |
| Diameter | mm | Ф3.0 or customized |
| End type | | PC | UPC | APC | PC | UPC |
| IL | dB | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.3 |
| RL | dB | 45 | 50 | 60 | 25 | 35 |
| Working temperature | ℃ | -40~+75 |
| Storage temperature | ℃ | -40~+80 |
| Wavelength | nm | 1310/1550 |
| Mating times | time | ≥1000 |
Cable Mechanical Performance Of FA-FXPCSPSPS1
| Test item | Technical parameter |
| Screening class (%) | Screening of strain≥2.0 |
| Minimum bending radium(mm) | 15mm (G657A1) 7.5mm(G657A2) |
| Strip strength of cladding(N) | Max. 1.3≤F≤8.9 Average 1≤F≤5 |
| Static fatigue index (nd) | ≥20 |
| Dynamic tensile strength(Gpa) | ≥3.8 |
| Diameter of single core second cladding (μm) | 250 |
| Cladding non- concentricity (%) | ≤2.0 |
| Cladding/buffer concentricity (μm) | ≤12.0 |
